Gossen MAVOLUX 5032 B USB [M503N] Illuminance Meter w/ Software & Case

This high precision luxmeter is available in class B and class C versions in accordance with DIN 5032-7, appendix B of IEC 13032-1 and CIE 69. Both variants are equipped with V(λ) adaptation as well as cosine correction, and reliably measure the illuminance of daylight and artificial sources of light. Even in the case of very bright sunlight or light  from headlights, no accessories are required.

Due to its outstanding accuracy in accordance with class B, the MAVOLUX 5032 B USB is used primarily for certification and inspection applications. An additional measuring range with high initial sensitivity of 0.01 lx makes it possible to measure extremely small light intensities. This even permits reliable measurement of emergency lighting. After pressing the HOLD key, the measured value is saved to memory and display illumination included  with this version is activated, making it possible to read the display in dark environments. Adaptation to the spectral brightness sensitivity of the human eye V(λ) is highly precise with minimal deviation of just f1‘ < 3 %.

With accuracy according to class C, the industrial luxmeter Mavolux 5032 C USB is primarily used for general applications.The smallest of four measuring ranges begins with an initial sensitivity of 0.1 lx. V(λ) adaptation deviation, which amounts to f1‘ < 7.5 %, is considerably better than the admissible error limit for class C.

Both variants can be used as unclassified luminance meters with the help of an optiona luminance  attachment with an acceptance angle of 15°.Luminance is measured in candelas per square meter (cd/m²) or foot-lamberts (fL), and  defines the perceived brightness of a back-lighted or reflecting surface.

At GOSSEN, great emphasis is placed upon reliability by means of calibration. For purposes of documented evidence, a factory calibration certificate or a DAkkS calibration certificate can be ordered along with either variant. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.

Features:

• Maximum precision – Classified measurement of illuminance in lx or fc in accordance with class B or class C per

      DIN 5032-7, appendix B of IEC 13032-1 and CIE 69.

• Broad measuring range – High initial sensitivity and a resolution of 0.01 lx or 0.001 fc for the MAVOLUX 5032 B

      USB, right on up to large illuminance values of 199,900 lx or 19,990 fc.

• V(λ) adaptation  –  The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the

      spectral brightness sensitivity of the human eye V(λ) The quality of this adaptation represents a significant

      difference between the class B and class C variants.

• Cosine correction – The luminosity of a flat measuring surface is proportional to the cosine of the incident angle of

      light. This relationship is taken into consideration by the

What's In The Box:

---

• (1) Brushed Aluminum Carry Case
• (1) GLUX 2 Software
• (1) USB Cable
• (1) Battery
• (1) Operating Instructions
• (1) Factory calibration certificate

Brochure/Datasheet

Instruction manual

Glux Software

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu